Engineering Books

 31] Scribers are made of... A] Mild steel  B] High carbon steel  C] Brass  D] Cast iron

 30] The part of the universal surface gauge which helps to draw a parallel line along a datum edge is the.. A] Rocker arm  B] Snug  C] Fine adjustment screw  D] Guide pins

 29] The size of an engineer’s vice is specified by the... A] Length of the movable jaw  B] Width of the jaws C] Height of the vice  D] Maximum opening of the jaws

 28] The reference surface during marking is provided by the... A] Surface gauge  B] Workpiece  C] Drawing of the work  D] Marking table surface

 27] The vice clamps are used to... A] Protect hard jaws  B] Clamp the work pieces rigidly C] Protect the finished surfaces  D] Prevent the movable jaw being filed

 26] While cutting small diameter pipes, it is advisable to watch regularly and ensure that... A] The cut is along the curved line  B] More saw teeth are in contract  C] The work is not overheated  D] Proper balancing of hacksaw is maintained

 25] A new hacksaw blade after a few strokes becomes loose because of the... A] Stretching of the blade  B] Wing-nut threads being worn out  C] Wrong pitch of the blade D] Improper selection of the set of saws.

 24] For cutting solid brass, the most suitable pitch of the hacksaw blade is... A] 1.8mm  B] 1.4mm  C] 1mm  D] 0.8mm

 23] For cutting thin tubing, the most suitable pitch of the hacksaw blade is... A] 1.8mm  B] 1.4mm  C] 1mm  D] 0.8mm

 22] Which one of the following is an indirect measuring tool?  A] Outside caliper   B] Vernier calliper  C] Steel rule D] Outside micrometer 

 21] The instrument used to mark parallel lines, parallel to the datum edge is - A] jenny caliper  B] Divider  C] Outside calliper  D] Inside calliper 

 20] The size of the dividers are specified by the ----------- A] Total length of legs  B] Distance between the points when fully opened  C] Length of legs without points  D] distance between the pivot and the point  

 19] The caliper meant for measuring the width of a slot is... A] Odd leg caliper  B] Outside caliper  C] Jenny caliper  D] Inside calliper

 18a ] One micrometer (U] is equal to... A] 0.1mm  B] 0.01mm  C] 0.001mm  D] 0.0001mm

 18] For basic categories of safety signs are available The meaning of”prohibition” sign ---- A] shows it must not be done  B] Shows what must be done  C] Warns the hazard or danger  D] Gives information of safety provision 

 17] Safety is ----------- A] nobody’s business  B] every bodise business  C] Some bodies business  D] The organization business 

 16] Benefit of SS system is ------ A] Increase in productivity  B] Increase in quality  C] Reduction in wastage of time  D] All of these 

 15] In Japanese Seiko stands for -------------- A] Shine  B] Sort  C] Standardize  D] Sustain 

 14] Colour code for Bins for waste paper segregation is ----- A] blue Colour  B] Yellow Colour  C] Red Colour  D] Green Colour 

13] First aid is given to an injured or ill person primarily.... A] Save life  B] Prevent further deterioration of the muff’s  C] Give best possible comfort  D] All of these  

12] in case of an accident, the victim should in A] Asked to take rest  B] Attended immediately   C] leave him  D] None of above

 11] In case of bleeding, take treatment Of  A] cold 3" and rest  B] spray cold water   C] Bandage immediately -----.  D] Enquire about the accident thought treatment 

10] Which type of fire extinguisher is used to put off general fire?  A] Water type Extinguisher  B] Foam type Extinguisher  C] Dry chemical powder Extinguisher  D] Carbon dioxide (C02] Extinguisher 

 9] To put off”Class B” fire, the types of fire extinguisher used is ............  A] dry power  B] Carbon dioxide  C] Jet of water  D] Foam type 

7] ABC stands for -------------- A] Automatic Breathing Control  B] Automatic Blood Control  C] Airway Breathing Circulation  D] Automatic Blood Circulation 

6] ln Personal Protect Equipment (PPE], 'sleeves’ is used to protect ---------- A] Face  B] Eyes  C] Ears  D] Hands 

 5] Which of the following is done for machine safety?  A] Check the oil level before starting the machine  B] Do things in a methodical way  C] Keep the floor and gangways clean and clear D] Don’t use dies and scarves 

4] While grinding, which is used to protect the eyes?  A] Dark green glass  B] Mask  C] Sun glasses  D] Safety goggles

3] Which of the following belongs to general safety? A Have a worker in good attitude B] The work  clean and clear  C] Concentrate on your work  D] Keep the floor and gangways clean and clear

2] In Personal Protect Equipment (PPE] HELMET is used to  A] protect head  B] Protect eyes  C] Protect hands D] Protect ears

1] Which one is a workshop safety? A] Keep shop floor clean and free from grease, oil or other slippery materials B] Stop the machine before changing the speed  C] Don’t use cracked or chipped tools  D] Don't try to stop a running machine with hand 

Engineerbuy website is for engineering products.